2024-Current Ford Mustang Splitter Extension

Fits all Ecoboost and GT, as well as non-handling pack Dark Horse.

Our 2024-Current Ford Mustang Performance Pack Splitter Extension is designed to provide extra front end downforce, as well as improved aesthetics.

The Splitter Extension is made with high-quality dry (pre-preg) carbon fiber finished in gloss or matte clear coat that is UV and scratch resistant. We are also offering a Polyurethane version in matte black finish. The Carbon Fiber version will withstand much higher speeds than the Polyurethane version. We highly recommend adding splitter rods to the Polyurethane version if the vehicle will be driven above 110 mph.

The Splitter Extension is held on by factory splitter bolts, extra provided screws, as well as 3M™ Super Strength Molding Tape. We recommend drilling small pilot holes into the OEM splitter before installing the provided screws.

All necessary mounting hardware included.

The vehicle's surface needs to be thoroughly cleaned with alcohol before the installation to ensure a proper bond with the 3M™ tape.

We recommend applying adhesion promoter on the back side of the flares before installing the 3M™ tape to help with better adhesion. Optimal surface temperature for the 3M™ Super Strength Molding Tape is above 65°F (18°C).

Bumper scrape guards like SLIPLO®(shown in the pictures) are highly recommended to prevent damage to the carbon fiber from scraping on the ground.

We highly recommend applying paint protection film on the carbon fiber products to prevent rock chip damage, and prolong the life of the finish.